MOVIN Docs
MOVIN | EN
MOVIN | EN
  • MOVIN
  • What's New?
  • Let's Get MOVIN: First Steps to Start
    • MOVIN TRACIN Setup
    • MOVIN Studio Setup
    • MOVIN Studio Configuration
      • Step 1. Connect Device
      • Step 2. Level Device
      • Step 3. Set MoCap Zone
  • Studio to Anywhere: MOVIN Studio Usage Guide
    • Create Actor
    • Hands Setting
      • Set Hand Rest Pose
      • Integrate with 3rd Party Gloves
    • Import Custom Character & Retargeting
    • Check, Record and Export Mocap Data
    • Adjust Mocap Data
    • Live-stream Mocap Data
      • Streaming Mocap Data into Notch
      • Streaming Mocap Data into Unity
      • Streaming Mocap Data into Unreal Engine
      • Streaming Mocap Data into Warudo
Powered by GitBook
On this page
  • Brief Introduction about the Display
  • Important Notes
  • Adjust the Mocap Zone
  1. Let's Get MOVIN: First Steps to Start
  2. MOVIN Studio Configuration

Step 3. Set MoCap Zone

PreviousStep 2. Level DeviceNextStudio to Anywhere: MOVIN Studio Usage Guide

Last updated 1 month ago

The final step of setup is to define the mocap zone—the 3D space in which motion capture will be performed.

Brief Introduction about the Display

  • Center Panel

    • The mocap zone is displayed as a rectangular prism in the center of the screen. This represents the space MOVIN TRACIN will use to detect and record motion.

  • Right Panel

    • Use the following slider controls to adjust the boundaries of the mocap zone:

      • 'Near' / 'Far' – adjust the front and back limits

      • 'Left' / 'Right' – adjust the horizontal span

      • 'Height' – adjust the vertical height of the zone

  • The mocap zone is measured relative to the center point, with the following limits:

    • Minimum size: 1m (width) × 1m (depth) × 2m (height)

    • Maximum size: 5m (width) × 4.5m (depth) × 3m (height)

    • For each axis:

      • Forward (toward MOVIN TRACIN): 0.5m to 2.0m

      • Sideways and backward: 0.5m to 2.5m

Important Notes

  • If point cloud data appears on the ground, it may be misinterpreted as a person, reducing mocap quality.

    • Click the '2. Level Device' button (top left) to ensure the ground plane is still aligned properly.

    • For detailed instructions, refer to the Step 2. Level Device page.

Adjust the Mocap Zone

  • In the right panel, use the 'Near', 'Far', 'Left', 'Right', and 'Height' sliders to define the exact area where motion will be captured.

    • When finished, click the 'Save' button to apply your changes.

    • Once saved, the point cloud will only appear within the defined zone.

  • Objects inside the mocap zone will be highlighted in red and block you from proceeding to the next step.

    • Remove all objects from the zone and click 'Check' again.

    • If objects cannot be moved, reduce the zone size to exclude them.

  • Click the 'Next' button to proceed to the next phase.

Congratulations—your setup with MOVIN TRACIN and MOVIN Studio is now complete!

You're ready to start capturing motion data, live-streaming to your favorite platform, or building immersive content. Let’s get movin'! 🚀

Display of Step 3. Set Mocap Zone
If point cloud data appears on the ground, return to step '2. Level Device' and adjust the point cloud.