MOVIN TRACIN Setup
Last updated
Last updated
You can also follow the setup process for MOVIN TRACIN through the YouTube video above. If you've already completed the hardware setup, feel free to skip ahead to the next section, MOVIN Studio Setup.
The guide below provides a detailed walkthrough.
MOVIN TRACIN is securely packaged to prevent damage during shipping.
Before assembling the device, please verify that all components are included:
MOVIN TRACIN main body
User manual
Power supply
Tripod
Ethernet cable
This section follows the same instructions as the MOVIN TRACIN Setup Manual. If you’ve already completed the assembly, feel free to skip ahead to the next section, MOVIN Studio Setup.
Extend the tripod to the recommended height depending on your model:
For MT-110, set the height to 50 cm
For MT-200, set the height to 85 cm
Ensure the tripod legs are spread out fully and stably.
Mounting method varies depending on the type of quick mount on your tripod:
Manual Quick Mount:
Place MOVIN TRACIN on the tripod head.
Turn the quick mount clockwise (to the left) to lock it.
To detach, turn it counterclockwise (to the right).
Auto Quick Mount:
Gently press MOVIN TRACIN down onto the tripod head until it clicks into place automatically.
To remove it, rotate the mount clockwise and lift the device.
If auto-lock fails, manually rotate the quick mount clockwise before positioning the device.
Before moving on, double-check that MOVIN TRACIN is firmly secured to the tripod.
The mocap zone is the space where MOVIN TRACIN captures human motion. Use the following guidelines to define and mark your mocap zone.
The center of the mocap zone is located 3 meters in front of MOVIN TRACIN.
From this center point, the default range is 0.5m to 2.0m forward (toward MOVIN TRACIN), and 0.5m to 2.5m to the rear and sides.
We recommend clearly marking the center and corners with tape to distinguish the zone boundaries.
Remove all objects inside the mocap zone to avoid tracking interference.
If the space cannot be cleared, reduce the zone size during setup in MOVIN Studio.
On top of MOVIN TRACIN, you'll find a circular level indicator.
Ensure the bubble is within the red circle to confirm the device is level.
If the device is tilted, your motion capture data may become distorted. Reposition the tripod on a stable, flat surface if necessary.
Great! You're all set with the hardware. Now let’s move on to installing the MOVIN Studio software on your computer.
If any items are missing, please reach out via the on the MOVIN Discord server. We’ll assist you as quickly as possible.
