MOVIN Docs
MOVIN | EN
MOVIN | EN
  • MOVIN
  • What's New?
  • Let's Get MOVIN: First Steps to Start
    • MOVIN TRACIN Setup
    • MOVIN Studio Setup
    • MOVIN Studio Configuration
      • Step 1. Connect Device
      • Step 2. Level Device
      • Step 3. Set MoCap Zone
  • Studio to Anywhere: MOVIN Studio Usage Guide
    • Create Actor
    • Hands Setting
      • Set Hand Rest Pose
      • Integrate with 3rd Party Gloves
    • Import Custom Character & Retargeting
    • Check, Record and Export Mocap Data
    • Adjust Mocap Data
    • Live-stream Mocap Data
      • Streaming Mocap Data into Notch
      • Streaming Mocap Data into Unity
      • Streaming Mocap Data into Unreal Engine
      • Streaming Mocap Data into Warudo
Powered by GitBook
On this page
  • Brief Introduction to the Display
  • Align the Point Cloud with the Horizontal Line
  1. Let's Get MOVIN: First Steps to Start
  2. MOVIN Studio Configuration

Step 2. Level Device

PreviousStep 1. Connect DeviceNextStep 3. Set MoCap Zone

Last updated 1 month ago

The second step in the setup process is to calibrate MOVIN TRACIN so that it can accurately understand the layout of your physical space.

Brief Introduction to the Display

  • Center of the Screen:

    • Tracin's data capturing the ground is displayed as a point cloud.

    • A gray horizontal line in the center serves as the alignment baseline for the point cloud.

  • Right Sidebar Options:

    • Click “Side View” or “Front View” to adjust the point cloud’s side or front perspective.

    • Use the four navigation buttons to move the point cloud vertically or rotate it.

Align the Point Cloud with the Horizontal Line

  • Ensure the topmost point of the cloud barely touches the gray horizontal line. for both 'Side View' and 'Front View'.

  • The point cloud in the picture above is misaligned; the point cloud is little bit lower and tilted against the gray line.

  • Click the “Counterclockwise Rotation” button to correct the tilt, and click the “Up” button to lift the point cloud until it grazes the line.

  • Repeat the alignment process in 'Front View' to ensure proper adjustment.

  • Toggle between "Side View" and "Front View" for detailed adjustments.

    • Ensure the point cloud is level and just barely touching the horizontal line in both perspectives.

  • Once aligned, click the “Save” button to preserve your settings.

Display of Step 2. Level Device
Click 'Counterclockwise Rotation' button to correct the tilt.
Click 'Up' button to lift the point cloud to barely touch the gray horizontal line.
Repeat the alignment process in 'Front View' to ensure proper adjustment.