Step 3. Set MoCap Zone

Last but not least, let's set the MoCap zone for your enjoyable motion capture.

Brief Introduction about the Display

Display of Step 3. Set Mocap Zone

• Center of the Screen:

  • The MoCap Zone is represented as a rectangular prism.

• Right Sidebar Options:

  • You can adjust the width, length, and height of the MoCap Zone using the corresponding fields.

  • The MoCap Zone can range from a minimum size of 1m x 1m to a maximum of 3m x 3m.

Adjusting the MoCap Zone

• Use the "Width", "Length", and "Height" options in the right sidebar to customize the MoCap Zone's size.

  • The default zone size is set to 3m x 3m.

  • If the available space is limited or items cannot be removed from the MoCap Zone, reduce the size of the zone as needed.

• Once the zone is adjusted, click the “Save” button in the right sidebar to store the settings.

Check the Zone Quality

• Navigate to the “Zone Quality” section on the right, and click the “Check” button to verify your setup.

Click 'Check' button to verify your setup.

• If the MoCap Zone is displayed in green in the center of the screen, your settings are correct. Click the “Start Mocap” button at the bottom right to begin capturing motion data.

  • If you encounter any issues, double-check that the MoCap Zone is clear of any obstructions and recheck the settings by pressing the Check button.

If the MoCap Zone is displayed in green, your settings are correct.

Congratulations! 🎉

You've successfully completed the setup of MOVIN Tracin and Studio. You're now ready to start extracting motion data or streaming as needed. Enjoy your motion capture experience with MOVIN!