Initial MOVIN Studio Configuration

To ensure the highest quality motion data, a few settings need to be adjusted in MOVIN Studio.

Don’t worry—it’s a simple process! Let’s go step by step.

Before you begin, ensure the following:

Double-check that the motion capture zone (MoCap Zone), as marked with tape earlier, is free of any obstructions.
- Only the motion capture subject should be present in the zone.
- MOVIN Tracin currently supports capturing a single subject only. Tracking multiple people or objects is not supported.
Ensure no reflective surfaces, such as mirrors or highly polished objects, are near the MoCap Zone.
- Verify that the floor material is not marble, glass, or any other reflective substance.
Check that the floor within the MoCap Zone is flat and stable.
The subject should avoid wearing loose-fitting clothing or garments made of reflective materials.

Last updated 4 months ago

To ensure the highest quality motion data, a few settings need to be adjusted in MOVIN Studio.

Don’t worry—it’s a simple process! Let’s go step by step.

Double-check that the motion capture zone (MoCap Zone), as marked with tape earlier, is free of any obstructions.
- Only the motion capture subject should be present in the zone.
- MOVIN Tracin currently supports capturing a single subject only. Tracking multiple people or objects is not supported.
Ensure no reflective surfaces, such as mirrors or highly polished objects, are near the MoCap Zone.
- Verify that the floor material is not marble, glass, or any other reflective substance.
Check that the floor within the MoCap Zone is flat and stable.
The subject should avoid wearing loose-fitting clothing or garments made of reflective materials.

Last updated 4 months ago