MOVIN TRACIN Firmware Update
This guide explains how to update the dedicated firmware file used to manage MOVIN TRACIN.
Download the Firmware File
Please download the firmware file from the Google Drive link below.
Firmware v2.0.0 Download
The total file size of firmware v2.0.0 is 4.3GB. Make sure your desktop has enough storage space before proceeding with the update.
Firmware v2.0.1 Download
We have identified an issue where, for some users who updated their MOVIN TRACIN device firmware to v2.0.0, the camera may intermittently fail to be recognized. Please update your device to firmware v2.0.1 to resolve this issue.
Note: Firmware v2.0.1 can only be installed on devices currently running v2.0.0. If you have not yet updated to v2.0.0, please do so first before proceeding with the v2.0.1 update.
Verify Device Operation and Access the System Monitor
Check that the front indicator light of your MOVIN TRACIN is on steadily and not blinking.
If the indicator light is off or continues blinking, disconnect the power cable and reconnect it. This process resets temporary boot errors, and most power-related issues can be resolved through this procedure.
Once you’ve confirmed that the device is operating normally, open your internet browser and go to 192.168.2.100:8001 to access the System Monitor page.
Run the Firmware Update
After uploading the firmware file, click Update Firmware in the Firmware Update panel to start the update.
When the update is finished, a Firmware Update Result popup will appear. If the Status shows Success, the update has been completed successfully.
Refresh the System Monitor webpage and check the Firmware Version under the System Information panel — it should display 2.0.0.
Reboot the System
Finally, click the Reboot button located at the top-right corner of the webpage to restart the entire system. The reboot will take about one minute. If the front indicator light of the device turns solid green without blinking, the update has been successfully completed and verified.
Last updated